- A2.6.3
- This material must comply with the requirements of Table A2.3.
Table A2.3 Performance criteria for indicator infill material Performance criteria
Procedure
Requirement
Material type Not Applicable Thermoset resin Permanent deformation resistance Wheel tracking to BS EN 12697-22 (Small device, Procedure A at 60°C) WTRAIR15,0 and RDAIR7,0 Tensile bond strength Tensile bond tested in accordance with appendix J in TRL report 176 ≥ 0.75 MPa Elongation BS EN ISO 527-1 & 3 – Plastics – determination of tensile properties ≥ 30%
Skip to main content
